Cronyx Site
About Cronyx
Products Prices Contact information Search English 
English Russian  Russian
Software Payment
What's new
F. A. Q.
Partners
Site map


Форум cronyx.ru (архив)

вот мойandreev  ::  2006-11-01 15:06


#
# /etc/cronyx.conf - configuration of Cronyx serial adapters
#
# $Id: cronyx.conf.in,v 1.11 2006/07/04 14:48:54 ly Exp $
#

# List of modules to load
cronyx_modules="@mod_load@"

# protocol PPP, get IP addresses from the peer
#<channel-name>="ppp"

# protocol PPP, use static IP addresses
#<channel-name>="ppp 200.0.0.1 200.0.0.2"

# protocol Frame Relay, two DLCIs
#<channel-name>="fr dlci16 100.0.0.1 100.0.0.2 dlci17 200.0.0.1 200.0.0.2"

# protocol Cisco/HDLC
#<channel-name>="cisco 100.0.0.1 100.0.0.2"

# Asynchronous protocol
#<channel-name>="async"

# Raw packet protocol, for developers only
# An example of using DPLL connection, with NRZI encoding.
#<channel-name>="raw 128000"

# raw packet protocol, for telephony applications
#<channel-name>="mode=phony raw ts=1-31"

# Remote bridge (default MAC address)
#<channel-name>="rbrg 201.0.0.1 255.255.255.0"

# Remote bridge (set MAC address)
#<channel-name>="rbrg 202.0.0.1 255.255.255.0 00:50:C2:06:2E:35"

# for Asterisk
#<channel-name>="zaptel ts=1-31"

# Base port addresses, autoprobe by default.
#sigma_ports=0x240,0x260,0x300
#tau_ports=0x240,0x260,0x300

# Interrupt numbers, autoprobe by default.
# Do not forget to mark these IRQs as 'Legacy ISA' in BIOS Setup.
#sigma_irq=5,10,11
#tau_irq=5,10,11

# DMA numbers, autoprobe by default.
# Do not forget to mark these DMAs as 'Legacy ISA' in BIOS Setup.
#sigma_dma=7,6,5
#tau_dma=5,6,7



сборка драйверов 5.0.1
andreev  ::  2006-10-31 17:43
   попробовал сноваandreev  ::  2006-11-01 13:46
      Это не ошибка в драйверах, а нехватка памяти (+)ly  ::  2006-11-01 14:03
         после перезагрузкиandreev  ::  2006-11-01 14:13
            А что при этом выдает sconfig ? (-)ly  ::  2006-11-01 14:16
               sconfigandreev  ::  2006-11-01 14:22
                   /etc/cronyx.conf от старой версии драйверов (+)ly  ::  2006-11-01 14:31
                     /etc/cronyx.confandreev  ::  2006-11-01 14:35
                        Нет, ваш cronyx.conf из другого места (+)ly  ::  2006-11-01 14:42
                           ronyx.confandreev  ::  2006-11-01 14:49
                              Нет, что-то не так (+)ly  ::  2006-11-01 14:56
                                 вот мойandreev  ::  2006-11-01 15:06
                                    Это cronyx.conf.in, а где /etc/cronyx.conf с нужной конфигурацией ? (-)ly  ::  2006-11-01 15:08
                                       /usr/src/tau/cronyx.confandreev  ::  2006-11-01 15:17
                                          Уже лучше (+)ly  ::  2006-11-01 15:26
                                             так и делаю.andreev  ::  2006-11-01 15:49
                                                psandreev  ::  2006-11-01 15:49
                                                   Пояснения (+)ly  ::  2006-11-02 18:40
   Эта версия больше не поддерживается (+)ly  ::  2006-10-31 17:59
      только что попробовал...andreev  ::  2006-10-31 18:14
         Пояснения (+)ly  ::  2006-10-31 18:25
         дополнениеandreev  ::  2006-10-31 18:15
            Что видно в /var/log/messages ? (-)ly  ::  2006-10-31 18:25
               messageandreev  ::  2006-10-31 18:37
                  А вы удалили предыдущие версии модулей ? (+)ly  ::  2006-10-31 18:44
                     видимо это и есть причинаandreev  ::  2006-10-31 19:00

Copyright © 1996-2024 Cronyx