****************************************************************************
Cronyx E1-XL-FX-SNMP

Mode: Normal, Clock=Link0, SaBits=Ones, Sig=Kewl start, Ring cadence=1:4,
      Echo=On, Sensor=Open
Link 0: High gain, HDB3, TS16=CAS, CRC4=Gen, Mon=Sa4, Ok
Link 1: Disabled
FXS 0: 0-Idle 0/0, 1-Idle 0/0, 2-Idle 0/0, 3-Idle 0/0
FXO 1: 4-Idle 0/0, 5-Idle 0/0, 6-Idle 0/0, 7-Idle 0/0

Timeslots: 1 3 5 7 9 1 3 5 7 9 1 3 5 7 9 1
   Link 0: 01234567.......*...............

Main menu:
  1) Statistics
  2) Event counters
  3) Loops...
  4) Link test...
  5) Configure...
  0) Reset

Command:
****************************************************************************
Common:
  1) Master clock: Link0
  2) Sa bits: All ones
  3) Sensor input: Alarm on closed
  4) Type of signaling: Kewl start
  5) Ring cadence: 1:4
  6) Echo canceller: On
****************************************************************************
Timeslots:

Use arrow keys to select the timeslot.
Set timeslot usage by entering symbol as follows:
  0-9, A-F      - FXO/FXS line number;
  =     - transparent pass between links;
  .     - idle.

Timeslots: 1 3 5 7 9 1 3 5 7 9 1 3 5 7 9 1
   Link 0: 01234567.......*...............
   Link 1: ...............*...............
****************************************************************************
Link 0:
  1) CAS: Yes
  2) Crc4: Generate
  3) Receiver gain: High
  4) Monitoring channel bit: Sa4
  5) Loss of sync action: Remote Alarm
  6) Line code: HDB3
  7) Auto AIS: Never
  8) Remote control: Enabled
  9) Enabled: Yes
****************************************************************************
FXS 0:
  1) Line 0 gain: TX 0, RX 0 dB
  2) Line 1 gain: TX 0, RX 0 dB
  3) Line 2 gain: TX 0, RX 0 dB
  4) Line 3 gain: TX 0, RX 0 dB
  5) Line 0 power: On
  6) Line 1 power: On
  7) Line 2 power: On
  8) Line 3 power: On
****************************************************************************
FXO 1:
  1) Line 4 gain: TX 0, RX 0 dB
  2) Line 5 gain: TX 0, RX 0 dB
  3) Line 6 gain: TX 0, RX 0 dB
  4) Line 7 gain: TX 0, RX 0 dB